Flexible Material Selection Scheme

The mixer can be customized with a variety of stainless steel, 201 stainless steel, 304 stainless steel, 316 stainless steel and other materials, and different materials can be used in combination. The equipment is distinguished when selecting materials, and the part in contact with materials and the part not in contact with materials; The mixer can also add anti-corrosion, square bonding, wear-resistant functional coating or protective layer. The stainless steel surface treatment is divided into sandblasting, wire drawing, polishing, mirror and other treatment methods, and applied to different parts of use.

All kinds of mixing principles have

There are three basic principles of powder mixing: 1. convection mixing: make the powder material move from one place to another, similar to the convection of the fluid, to achieve uniform mixing; 2. diffusion mixing: the separated particles are dispersed to the continuous display On the inclined plane, like the general diffusion effect, they are mixed with each other. Infiltration to get uniform mixing; 3. shear mixing: in the material mass pile, the relative movement between particles, in the material to form a number of sliding surface, like a thin layer of fluid like mixing and blending, to achieve shear efficient mixing. The laboratory mixer has the above three kinds of mixing principle, to meet all kinds of powder mixing requirements.

Quick and convenient bucket change

One machine can be equipped with barrels of different volumes, which is suitable for mixing tasks with different batch requirements of small, medium and large quantities. It is simple and quick to change barrels, while avoiding cross-contamination of different materials, and truly achieving special barrel. The inside of the barrel and the materials can be disassembled and installed as a whole, and can be used as a transportation turnover barrel. The barrel cover can be opened to take out the materials, and the inside of the barrel can be cleaned.