The small editor wants to discuss the accuracy of the mixer mainly in the gap between the various parts of the mixer. Each mixer equipment is composed of various parts, which affects the whole body. One mistake may affect the use failure of the whole mixer.

Make a mixer, each part of the plate can not have errors, especially the powder mixer, 1mm error will let the powder flow out, some powder and air chemical action, there is a serious risk will lead to explosion. Therefore, we must strictly control the error of the mixer and ensure the accuracy. The bearing and sealing ring of the mixer must be tightened, the motor must be seamless with the bearing, the stirring blade must be about 1-3cm from the barrel wall, the mixing uniformity must be ensured, the electric control box must be sealed to prevent dust from entering, whether the connection sensor of the rack of the outer tight parts (such as screws must be tightened, cannot fall off and fall into the material during the mixing process) is tightened, and the height error must not be greater than 1mm when the basic surface of the mixer is installed.

The accuracy of the mixer affects the mixing performance. Shanghai Neil Machinery Manufacturing Co., Ltd. checks the production of the mixer layer by layer, and the shipment is eliminated by quality inspectors. The materials can only be shipped after several logistics tests. Mixer quality can determine the production of enterprises.